Advantages of our Prefab Shelters

  • Prefab shelters are made in small components, thereby easy for transportation in difficult terrains.

  • The structures are light, thereby require minimal foundation. They can be erected on any firm base or on stilts.

  • The erection is simple and fast.

  • Prefab shelters can be dismantled and re-erected at different places, if required.

  • The structures are light and thereby safe in earthquake prone areas.

  • Prefab shelters help to provide instant accommodation with better living conditions in projects and other townships.

  • Prefab shelters are comfortable, durable and affordable.


  • General and Technical Specifications for Pre fabricated Shelters


                                                                                                                                                                                         Close it
                                                                                                                                                                                         Close it
                                                                                                                                                                                         Close it
                                                                                                                                                                                         Close it



    • Roof structure & cover
    • Pre painted galvanized sheets (PPGI) of 0.4 mm thick trapezoidal sheets laid over a framework of trusses, columns and purling (made out of rectangular hollow sections of size suitable as per design requirements fixed using suitable HSD screws. A pre painted galvanized ridge cover to be fixed on top junction of the roof using suitable fasteners / HSD screws. PPGI end flashings or drain water gutters considered as per drawing. Insulated roof sheets can be supplied as per requirement.


    • Wall
    • Providing & fixing of wall using 50 / 75 mm thick interlocking aerated concrete wall panels made out of two 5mm thick cement fiber boards (Asbestos free) conforming to IS 14276 - 1995 and with fill by aerated concrete and expandable polystyrene granules/ Polyurethane foam (PUF). The boards shall be fixed on floor and top using 25/52c 1mm thick GI Channels.


    • Wall finish
    • Further 12mm thick plaster (gypsum) board layer on all internal exposed surfaces of walls fixed directly on the wall panels complete with joint finish using jointing compound & fiber tape to give smooth joint less finish. Alternative wall papers shall be considered.


    • False Ceiling
    • Providing & fixing of false ceiling using 595x595x12mm mineral fiber board / gypsum board. The false ceiling panels should be placed on a suspended grid frame made of pre painted GI steel consisting interlocking main runner, intermediate tee sections and wall L angles to form 600 x 600mm grid suspended from ceiling using GI wire of required thickness from roofing structure.


    • Doors
    • Frame shall be made of pressed steel using powder coated CR coil 1.25mm thick, shutter will be made out of 32 mm thick wooden / ERP flush door with necessary hardware and approved shade oil paint / laminated finish.


    • Windows
    • Frame made from Pressed steel using powder coated CR 1.25mm Thick C Channels of size 30x52 or 77mm ( as per wall thickness) and MS / aluminum / UPVC window frame with glazed panel using 6mm thick float glass & necessary hardware.


    • Painting
    • Outside walls are painted with 2 coats of acrylic paint and inside walls are applied with 2 coats of oil bound distemper or any other paint as per choice.